Before you update your iPhone to iOS 11, you should be aware of all the consequences.One of the most common problems is that iPhone stuck on Apple logo when upgrading to iOS 11. If you are sad to come up with this problem, it is luckily that we have the fixes for this issue. Before proceeding to the fixes, it is necessary to let you know why this thing happens.
Reason of iPhone Gets Frozen on Apple Logo When Upgrading to iOS 11
There could be many reasons if your iPhone gets stuck on Apple logo. But when it happens while updating the firmware, the most probable reason behind this could be either compatibility issue or driver issue. Basically, every time when a new firmware version gets announced, the company releases its unstable version or beta version before launching the stable version. The beta version is intended to get tested by the users and therefore is launched before the stable version. Since the stable version is not launched yet, you’ll be attempting to install the beta version which, in turn, can result in the compatibility issue and ultimately causing iPhone stuck in Apple logo and other kinds of issues.
Solution 1: Check USB Cable and Port
Checking USB cable and ports on Mac or PC is the first step when iPhone gets frozen on Apple logo. If any of these is defective or flawed, this can be a big interruption in installing iOS 11 beta. If you have experienced connecting problems before, try a different port. Also, use a fresh and fine USB cable.
Solution 2: Force Restart iPhone
If iPhone stuck on Apple logo, one of the easiest ways to overcome that problem is forcing restart the iPhone. The steps for this are given below:
For the users of iPhone 6 and earlier models – Start by pressing “Home” button and “Sleep/Wake” button. Keep holding the buttons until you see Apple logo. It will take approximately 10 seconds.
For the users of iPhone 7 or 7 Plus – The process is almost same. Start by pressing “Sleep/Wake” button and “Volume Down” button. Keep holding the buttons until Apple logo appears.
Solution 3: Put iPhone in DFU Mode & Restore with iTunes
If neither of the solution were of use, you need to put your device in DFU mode and restore your iPhone with iTunes. DFU will help in completely restoring the device. Therefore it will result in erasing all the data from the device. To perform it, go along the following steps.
-Open iTunes and connect your iPhone to the PC, no matter the iPhone is on or off.
-Push “Sleep/Wake” and “Home” button for around 10 seconds.
-Now, release the “Sleep/Wake” button but keep pressing “Home” button (for iPhone 7, press Volume Down button) until you get the notification of ‘iTunes has detected an iPhone in recovery mode’.
-Now release the button and you will observe the iPhone turning fully black. This means the device has entered DFU mode successfully.
-Restore it with iTunes.
Solution 4: Hardware Problems
If you are still in trouble and the iPhone frozen on Apple logo problem has not gone, sadly to say but this could be a hardware issue. To repair hardware problem, find a nearest authorized Apple repair center and head towards it. But this is an advice that before moving to the Apple store, please create a backup of all your data in your device. After that, hand over your device to the expert in the store and get the problem fixed by them.
Read Also: How to Recover Data When iPhone Got Stuck During iOS 11 Upgrade